20 articles on CFD, FEA and electronics simulation
This is a comparative calculation of two possible designs for Coastal Defense Walls, based on the MPS method (Particleworks).The model represents a shallow water, near-shore case, with a 1/2 gradient sea-wall, from a still water depth of 2 m, up to...
Read More
ANSYS Parametric Design Language (APDL) is a powerful structured scripting language used to interact with the ANSYS Mechanical solver. Mechanical APDL (MAPDL), a finite element analysis program, is driven by APDL. APDL and MAPDL can be used for many tasks, ranging...
Read MoreSubmodeling, as the name suggests, is the modeling of a portion of a global model to capture the effects of refined mesh in a smaller model. This is done to avoid having the whole assembly meshed with fine elements. ANSYS Mechanical...
Read More
How to get clean CAD Geometries and Optimized Design CheckingThe new topologies that are obtained in a topology optimization simulation cannot be used directly. They must be transformed in CAD geometries. We present below how to reverse engineering the optimized component...
Read More
The term structural optimization is commonly used for the optimization of engineering structures for improved strength or stiffness properties and reduced weight or cost.ANSYS Mechanical 2022R1 provides the following optimization methods: 1. Topology OptimizationThere are two options implemented in ANSYS Mechanical...
Read More
The term structural optimization is commonly used for the optimization of engineering structures for improved strength or stiffness properties and reduced weight or cost.ANSYS Discovery 2022R1 provides topology optimization with the following options: Optimization for Strength or Response to Free Vibration....
Read More
Introduction In the autumn of 2019 we started a High Frequency Simulation and Verification Course using ANSYS products at the Faculty of Electronics, Bucharest. It consisted of 3 hours laboratory sessions taking place every 2 weeks. The course reunited undergraduate, master...
Read More
Introduction This article is the final one from a pair of three, each characterizing a different frequency interval in the impedance profile of two parallel power planes. I investigated the capacitive interval in thisolder article, the inductance in a blog post...
Read More
Introduction In this article I direct my attention toward the study of inductance. The reason why this measure is important to be studied is the same as previously mentioned with regard to capacitance, which I have in depth investigated in a...
Read More22 October 2026 • Hotel Capitol, Bucharest
A full day dedicated to numerical simulation, powered by Cadence & Particleworks. Bringing together the Romanian CFD/CAE community.
