ANSYS Parametric Design Language (APDL) is a powerful structured scripting language used to interact with the ANSYS Mechanical solver. Mechanical APDL (MAPDL), a finite element analysis program, is dr
Submodeling, as the name suggests, is the modeling of a portion of a global model to capture the effects of refined mesh in a smaller model. This is done to avoid having the whole assembly meshed with
The term structural optimization is commonly used for the optimization of engineering structures for improved strength or stiffness properties and reduced weight or cost.ANSYS Mechanical 2022R1 provid
The term structural optimization is commonly used for the optimization of engineering structures for improved strength or stiffness properties and reduced weight or cost.ANSYS Discovery 2022R1 provide
How to get clean CAD Geometries and Optimized Design CheckingThe new topologies that are obtained in a topology optimization simulation cannot be used directly. They must be transformed in CAD geometr
Introduction In the autumn of 2019 we started a High Frequency Simulation and Verification Course using ANSYS products at the Faculty of Electronics, Bucharest. It consisted of 3 hours laboratory sess
Introduction This article is the final one from a pair of three, each characterizing a different frequency interval in the impedance profile of two parallel power planes. I investigated the capacitive
Introduction In this article I direct my attention toward the study of inductance. The reason why this measure is important to be studied is the same as previously mentioned with regard to capacitance
Introduction This article was started a long time ago and while investigating its topic of interest I stumbled upon a different subject which quickly materialized in this interesting study. The presen
